Cameras & sensors / Kit / assembly
OLED weather readings, trend arrows, comfort labels and configurable light/buzzer alerts.
Read the original build See shopping list
Physical sensors drive a desktop OLED and light/buzzer alerts.
Article describes successive conversations adding readings, trends, labels, alarms and physical controls.
A kit, not a finished consumer weather station. Sensor revisions vary; readings are not safety measurements.
Manufacturer project showcase
The source builds on the prewired kit. Do not buy a second Arduino, OLED or duplicate sensors just because they appear in the program.
Quantities are for one build. Unless marked source-specified, they are planning quantities; confirm kit contents and the chosen configuration before ordering.
Controller, environmental sensors and OLED in one kit.
Creator source. Planning quantity for one build; check the selected configuration.
Product page
Connect to the computer for programming or data.
A charge-only cable cannot flash firmware. Check package contents before ordering a second cable.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Use existing equipment or match the specification above. No exact purchase link verified.
Build, configure or flash the software.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Use existing equipment or match the specification above. No exact purchase link verified.
Power the device.
Reuse USB power; check kit documentation for sensor revision.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Use existing equipment or match the specification above. No exact purchase link verified.
Read and show environmental data.
Not a shopping list for separate sensor boards; confirm the actual kit’s sensor revisions.
Creator source. Planning quantity for one build; check the selected configuration.
Built in or supplied with the stated device; check package contents before buying separately.
Source reviewed, not assembled or hands-on tested. A working product page does not confirm stock, firmware compatibility or a complete build.
EEVblog 121GW
Reconstructs the meter application and bootloader as editable C, then tests it on the meter including Bluetooth.
Plustek OpticFilm 8200i with Genesys GL128
Custom Linux scanner backend plus Negative Vibes app, including infrared dust removal and nondestructive image adjustments.
Lenovo ThinkPad X1 Carbon Gen 14 Aura Edition; Sony IMX471 / Intel IPU7
Custom kernel and camera-processing fixes improve low-light brightness, vignetting and white balance.
Share your hardware project so others can try it.
